Home   //   Products
HOLDX_S-SAFIX_Set-Default.249

Your advantages

  • Compact process lock
  • 500 N locking force
  • RFID sensor
  • LED diagnosis

 

Downloads

HOLDX S1-W3-A-P SET
SET HOLDX S1 process lock with RFID safety sensor

The new SAFIX 3 RFID safety sensor impresses due to its compact design and a hole distance of 22 mm. It can be actuated from the front and both sides and is available in 3 different versions with a choice of low level or high level coding according to EN ISO 14419. The sensor has protection class IP69K, holds an ECOLAB approval and can either be purchased with an M12, 8-pole pigtail cable or a fixed cable length of 5 or 10 metres.

Thanks to its OSSD output signals, the sensor can be connected to all standard control and safety relays. A total of up to 30 sensors can be switched in series. An information signal and a three colour LED display on the sensor are provided for diagnosis purposes.

 

Betreff: HOLDX S1-W3-A-P SET SET HOLDX S1 process lock with RFID safety sensor

General data

Type designation
HOLDX S1-W3-A-P SET
Item number
SP-X-73-000-52
Functional type
RFID safety sensor
Safety-relevant data SAFIX 3
Service life TM (EN ISO 13849-1)
20 Years
Coding levels
Standard

Safety data

PFHd (EN ISO 13849)
2,24 x 10^-9
Category (EN ISO 13849-1:2015)
cat. 4
SIL (acc. IEC 62061)
SIL3, SILCL3
Approvals
TÜV_SÜD, CE

Environmental conditions

Max. storage temperature
−25… +70 °C
Max. operating temperature
−25… +70 °C
Contamination level
2

Electrical data

Rated impulse withstand voltage Uimp
1000 V kV
Overvoltage category
II
Electrical service life (nominal load)
20 Years
Design / Connections
10 m fixed cable with pigtail
Contact type
OSSD
Supply voltage
Ue: 24 VDC − 15%/+ 10% (PELV according to 60204-1) V
Rated insulation voltage Ui
50 V
Power consumption in ambient conditions
23,75 W
No-load current I0
(not activated) 10 mA / (activated) 30 mA
Switching frequency
HOLDX: 1 kHz; SAFIX: 3
- Solenoid control
IN, Pin 8
LED lighting
3 Colors
Connection type
Cable
Series connection
30
Utilisation category
D-12/DC-13
Rated operating current Iₑ
0,6 A
Rated operating voltage Ue
24 V
Power consumption in ambient conditions
6,4 W
Switching frequency
HOLDX: 1 kHz SAFIX: 3 Hz Hz
No-load current I0
HOLDX: max. 300 mA SAFIX: 10 mA (disactivated)/30 mA (activated)

Mechanical data

Width
40 mm
Mounting
screw connection with M4 screws
Length
85 mm
Locking force Fmax
- typical
500
- guaranteed
30
Height offset
+/- 2,5
Lateral offset
+/- 2,5
Electric magnet material
Aluminium, hard anodised
Anchor plate material
Steel, nickel-plated
Shock resistance
30 g/11 ms
Vibration resistance
Amplitude 1 mm, 10 … 55 Hz
Switching distance Sn
12 mm
Assured switching distance ON S(ao)
8 mm
Hysteresis
2 mm
Repeat accuracy R
< 0,5 mm
Mechanical service life
>10⁷ switching processes switching cycles
Width of anchor plate
40 mm
Length of anchor plate
87,5 mm
Height of anchor plate
22 mm
Height
49 mm

Electrical drawings

Connection example 1
Connection example 1
Connection example 2
Connection example 2

Equipment

C8D10
C8D15
C8D25
C8D40
C8D5
M8-M12-C80153-VG
M8-M12-C8103-G
M8-M12-C813-G
M8-M12-C823-G
MOSAIC M1
S series
SAFIX S3-A-10M
SAFIX S3-A-5M
SAFIX S3-A-P
SAFIX S3-X-10M
SAFIX S3-X-5M
SAFIX S3-X-P
SAFIX Set I3-A-10M
SAFIX Set I3-A-5M
SAFIX Set I3-A-P
SAFIX Set I3-X-10M
SAFIX Set I3-X-5M
SAFIX Set I3-X-P
SAFIX T5
SAFIX T6
SAFIX W3-A-10M
SAFIX W3-A-5M
SAFIX W3-A-P
SAFIX W3-A-P4
SAFIX W3-A-P4-5cm
SAFIX W3-X-10M
SAFIX W3-X-5M
SAFIX W3-X-P
T series
back