Home   //   Products

Your advantages

  • Can be combined with the contactless SAFIX safety sensor (PLe)
  • Easy and quick installation
  • Smallest design on the market
  • 500 N locking force
  • No wear
  • Only one connection cable required, standard for all versions M12/8-pole
  • Protection class IP67
  • No special analysis unit required

Downloads

HOLDX S1
Magnetic process lock

The HOLDX S1 compact, magnetic process lock with 500 N locking force, protection class IP67 and easy installation can be utilised everywhere where doors, hatches or compartments need to be locked.

The HOLDX S1 process lock offers easy fitting options for safety sensors. In combination with the contactless SAFIX RFID sensor, this enables secure position monitoring (PLe according to EN ISO 13849-1) with process locking. The HOLDX S1 is opened without a voltage supply and can provide a locking force of 500 N on almost all safety doors and openings. When the holding magnets are in an unlocked state, a 30 N permanent magnet fixes the door or opening in place. Irrespective of whether it is used as a standalone device or in combination with the SAFIX, only an 8-pole cable is required to connect the HOLDX S1. The XCONN secure distributor box can be easily used for switching the process locks in series without the need for a large amount of wiring.

The LEDs on the process lock ensure user-friendly diagnosis and can be viewed from all sides. The blue LED indicates to the user whether the device is in a locked state.

 

Betreff: HOLDX S1 Magnetic process lock

General data

Type designation
HOLDX S1
Functional type
Magnetic process lock
Item number
SP-X-73-000-00
Service life TM (EN ISO 13849-1)
20 Years

Environmental conditions

Max. storage temperature
−25 … +70 °C
Max. operating temperature
−20 … +50 °C
Contamination level
3

Electrical data

Overvoltage category
III
Design / Connections
Design/Connections M12 male connector, 8-pin / Safety sensor: M12 female connector, 8-pin
Rated operating voltage Ue
-15%/ +10% 24 V
Supply voltage
Ue: 24 VDC − 15%/+ 10% (PELV according to 60204-1) V
Power consumption in ambient conditions
6,4 W
No-load current I0
max. 300 mA
Switching frequency
1
- Solenoid control
IN, Pin 8
Connection type
Sourcing output, short-circuit proof
Electrical data - safety inputs
Safety inputs
X1 and X2
Safety outputs
Y1 and Y2
Electrical data - safety outputs
Amount of safe semiconductor outputs
2 pcs
max. output current safety output
0,25 A
residual current
≤ 0,5 mA
Diagnostic output
Sourcing output, short-circuit proof
Rated operating current Iₑ
0,6 A
Utilisation category
DC-12: 24 V / 0,25 A DC-13: 24 V / 0,25 A
Rated operating current Iₑ
0,6 A
Rated operating voltage Ue
24 VDC -15% / +10%
Power consumption in ambient conditions
6,4 W
Switching frequency
1 Hz
No-load current I0
max. 300 mA
pin assignment with SSP accessories cable
X1.1 HOLDX with connected safety sensor
1
A1 Ue
2
X1 safety input 1
3
A2 GND
4
Y1 safety output 1
5
OUT diagnostic output
6
X2 safety input 2
7
Y2 safety output 2
8
IN +24 V solenoid activation
X 1.2 safety sensor
1
A1 Ue
2
X1 safety input 1
3
A2 GND
4
Y1 safety output 1
5
OUT diagnostic output
6
X2 safety input 2
7
Y2 safety output 2
8
EDM or Start (depending on sensor type)

Mechanical data

Width
40 mm
Length
85 mm
Locking force Fmax
- typical
500 N
- guaranteed
30 N
Fixing force
30 N
Height offset
± 2,5 mm
Lateral offset
± 2,5 mm
Housing material
Aluminium, hard anodised
Electric magnet material
Aluminium, hard anodised
Anchor plate material
Steel, nickel-plated
Shock resistance
30 g/11 ms
Vibration resistance
10-55 Hz
Mechanical service life
>10⁷ switching processes switching cycles
Dimensions of anchor plate
Width of anchor plate
40 mm
Length of anchor plate
87,5 mm
Height of anchor plate
22 mm
Dimensions
Height
49 mm

Electrical drawings

Connection example 2
Connection example 2

Equipment

C8D10
C8D15
C8D25
C8D40
C8D5
M8-M12-C80153-VG
M8-M12-C8103-G
M8-M12-C813-G
M8-M12-C823-G
MOSAIC M1
S series
S14LDRB-H08-E2-I1-Q1A0-Q2A0-Q3C0-Q4I0-W06
S14LDRB-H08-E2-I1-Q1A0-Q2I0-Q3C0-Q4I0-W10
S14LDRB-H09-E2-I1-I1-Q1A0-Q2A0-Q3C0-Q4I0-W07
S14LDRB-H09-E2-I1-I1-Q1A0-Q2I0-Q3C0-Q4I0-W11
S14LDRB-H0A-E2-I1-I1-I1-Q1A0-Q2A0-Q3C0-Q4I0-W08
S14LDRB-H0A-E2-I1-I1-I1-Q1A0-Q2I0-Q3C0-Q4I0-W12
S14LDRB-H0A-E2-I1-I1-K4-Q1A0-Q2I0-Q3C0-Q4I0-W09
S16LDRB-H0A-E2-I1-I1-K4-Q1A0-Q2I0-Q3C0-Q4I0-W13
SAFIX LPZ-A-10M
SAFIX LPZ-A-QC-M12
SAFIX LPZ-M-10M
SAFIX S3-A-10M
SAFIX S3-A-5M
SAFIX S3-A-P
SAFIX S3-X-10M
SAFIX S3-X-5M
SAFIX S3-X-P
SAFIX Set I3-A-10M
SAFIX Set I3-A-5M
SAFIX Set I3-A-P
SAFIX Set I3-X-10M
SAFIX Set I3-X-5M
SAFIX Set I3-X-P
SAFIX T5
SAFIX T6
SAFIX W3-A-10M
SAFIX W3-A-5M
SAFIX W3-A-P
SAFIX W3-A-P4
SAFIX W3-A-P4-5cm
SAFIX W3-X-10M
SAFIX W3-X-5M
SAFIX W3-X-P
T series
XCONN A1
XCONN P6-M12-10m
XCONN P6-M12-5m
XCONN P6-M12-M23
back